Manual tube pullers for the removal of tubes in pressure vessels up to 1.0"

Tube Range: 1/4"OD to 1.0"OD.

Manual tube puller for removing tubes from pressure vessels up to 1.0 inches.


A specially designed manual tube pulling tool requiring minimal effort, light in weight, and easily portable.

No power needed: Manual insertion and removal of tube puller with a hand wrench. Ideal for field service applications.

Simple Design : Only two major parts reduce inventory.Ease of use : Hex at back of spear allows tightening without disassembly of thrust mechanism.

Consult the PDF Specifications below to cross refer all data to the tube OD, wall thickness and tube sheet thickness.